SAFETY DATA SHEET according to Regulation 1907/2006
Product name:

Cure It Acetone

Creation date: 16.7.2019 · Revision: 2.12.2019 · Version: 1

1. Identification of the substance/mixture and of the company/undertaking


chemius.net/5Xf69

1.1. Product identifier

Product name

Cure It Acetone

Name

acetone (CAS: 67-64-1, EC: 200-662-2, Index: 606-001-00-8)

REACH Registration number

01-2119471330-49

1.2. Relevant identified uses of the substance or mixture and uses advised against

Relevant identified uses

Solvent.

Uses advised against

Do not use for purposes other than those prescribed.

1.3. Details of the supplier of the safety data sheet

Supplier

G&B Northwest Ltd
Address: Giants Hall Farm, WN6 8RY Wigan, United Kingdom
Phone: +44 (0)1942 518150
E-mail: technical@cureit.uk.com

1.4. Emergency telephone number

Emergency

+44 (0) 3301 222666

Supplier

+44 (0)1942 518150 Mon-Friday 8.30am – 4.30pm

2. Hazards identification

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008 (CLP)

Flam. Liq. 2; H225  Highly flammable liquid and vapour.
Eye Irrit. 2; H319  Causes serious eye irritation.
STOT SE 3; H336  May cause drowsiness or dizziness.

2.2 Label elements

2.2.1. Labelling according to Regulation (EC) No 1272/2008 [CLP]

Signal word: Danger

H225  Highly flammable liquid and vapour.
H319  Causes serious eye irritation.
H336  May cause drowsiness or dizziness.
EUH066  Repeated exposure may cause skin dryness or cracking.
P210  Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233  Keep container tightly closed.
P235  Keep cool.
P240  Ground and bond container and receiving equipment.
P241  Use explosion-proof electrical/ventilating/lighting equipment.
P242  Use non-sparking tools.
P243  Take action to prevent static discharges.
P261  Avoid breathing mist/vapours/spray.
P264  Wash hands, forearms and exposed areas thoroughly after handling.
P271  Use only outdoors or in a well-ventilated area.
P280  Wear protective gloves/protective clothing/eye protection.
P303 + P361 + P353  IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304 + P340  IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338  IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312  Call a POISON CENTER/doctor if you feel unwell.
P337 + P313  If eye irritation persists: Get medical advice/attention.
P370 + P378  In case of fire: Use appropriate media to extinguish.
P403 + P233  Store in a well-ventilated place. Keep container tightly closed.
P405  Store locked up.
P501  Dispose of contents/container in accordance with national regulation.

2.2.2. Contains:

acetone (CAS: 67-64-1, EC: 200-662-2, Index: 606-001-00-8)

2.2.3. Special provisions

Special hazards are not known or expected.

2.3. Other hazards

In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop.
The components in this formulation do not meet the criteria for classification as PBT.

3. Composition/information on ingredients

3.1. Substances

Name CAS
EC
Index
% Classification according to Regulation (EC)
No 1272/2008 (CLP)
Specific Conc. Limits Classification according to directive 67/548/EEC or 99/45/EC REACH Registration No.
acetone 67-64-1
200-662-2
606-001-00-8
≤ 100 Flam. Liq. 2; H225
Eye Irrit. 2; H319
STOT SE 3; H336
EUH066
F; R11
Xi; R36
R66-67
01-2119471330-49

3.2. Mixtures

For substances see 3.1.

4. First aid measures

4.1. Description of first aid measures

General notes

Never give anything by mouth to an unconscious person. Place patient in recovery position and ensure airway patency. When in doubt or if feeling unwell seek medical assistance. Show the safety data sheet and label to the physician.

Following inhalation

Remove patient to fresh air - move out of dangerous area. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Obtain professional medical help!

Following skin contact

Take off all contaminated clothing. Wash affected skin areas thoroughly with plenty of water and soap. If symptoms develop and persist, seek medical attention.

Following eye contact

Immediately flush eyes with running water, keeping eyelids apart. If irritation persists, seek professional medical attention.

Following ingestion

Do not induce vomiting! If vomiting occurs, the patient should hold the head lower than the hips, because it reduces the possibility of aspiration. Rinse mouth and drink plenty of water (only if the person is conscious). Immediately consult a doctor. Show the physician the safety data sheet or label.

4.2. Most important symptoms and effects, both acute and delayed

Inhalation

Vapours may cause drowsiness and dizziness.
Excessive exposure to spray mist, fog, or vapours may cause respiratory irritation.
Coughing, sneezing, nasal discharge, labored breathing.

Skin contact

Repeated exposure may cause dry skin or cracked skin.
Contact with skin may cause irritation (redness, itching).

Eye contact

Redness, tearing, pain.

Ingestion

May cause abdominal discomfort.
May cause nausea/vomiting and diarrhea.
Irritates mucous membranes in the mouth, throat, esophagus and in gastrointestinal area.

4.3. Indication of any immediate medical attention and special treatment needed

Have eye wash facilities in place close to the operators’ work area to provide immediate first aid prior to medical attention. Severe cases of eye contact and ingestion should receive medical attention immediately.

5. Firefighting measures

5.1. Extinguishing media

Suitable extinguishing media

Carbon dioxide. Dry chemical powder. Water spray. Alcohol resistant foam. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable extinguishing media

Full water jet.

5.2. Special hazards arising from the substance or mixture

Hazardous combustion products

Highly flammable liquid and vapour. May form flammable/explosive vapour-air mixture. In case of a fire toxic gases can be generated; do not inhale gases/smoke.

5.3. Advice for firefighters

Protective actions

In case of fire or heating do not breathe fumes/vapours. Cool containers at risk with water spray. If possible remove containers from endangered area. No action shall be taken involving any personal risk or without suitable training. In case of fire evacuate the area. Prolonged heating can cause an explosion. Fight fire from a reasonable distance.

Special protective equipment for firefighters

Firefighters should wear appropriate protective clothing for firefighters (including helmets, protective boots and gloves) (EN 469) and self-contained breathing apparatus (SCBA) with a full face-piece (EN 137).

Additional information

Contaminated firefighting water and fire residues must be disposed of in accordance with the local regulations.

6. ACCIDENTAL RELEASE MEASURES

6.1. Personal precautions, protective equipment and emergency procedures

6.1.1. For non-emergency personnel

Protective equipment

Use personal protective equipment (Section 8).

Emergency procedures

Ensure adequate ventilation. Keep away from sources of ignition and/or heat; No smoking! Take precautionary measures against static discharges. Prevent accumulation of vapours - vapours and air can form explosive mixtures. Vapours can accumulate in low-lying areas. Evacuate the danger zone. Evacuate personnel. No action shall be taken involving any personal risk or without suitable training. Prevent access to unprotected personnel. Do not breathe vapour or mist. Avoid contact with skin, eyes and clothing. In the event of fire and/or explosion do not breathe fumes.

6.1.2. For emergency responders

During intervention, use personal protective equipment (Section 8).

6.2. Environmental precautions

Do not allow product to reach water/drains/sewage systems or permeable soil. If accidental large entry into water or ground occurs, inform responsible authorities.

6.3. Methods and material for containment and cleaning up

6.3.1. For containment

Stem the spill if this does not pose risks.

6.3.2. For cleaning up

Prevent release into the sewer, water, basements or confined areas. Absorb product (with inert material), collect it in special container and dispose it to a licensed hazardous-waste disposal contractor. Make sure the leakage site is well aired. Use spark-proof tools. Dispose in accordance with applicable regulations (see Section 13).

6.3.3. Other information

See Section 7: safe handling. See Section 11 for additional information on health hazards. See Section 12: ECOLOGICAL INFORMATION.

6.4. Reference to other sections

See also Sections 8 and 13.

7. Handling and storage

7.1. Precautions for safe handling

7.1.1. Protective measures

Measures to prevent fire

Ensure adequate ventilation. Take precautionary measures against static discharges. Ensure proper grounding of the equipment. Keep away from sources of ignition - no smoking. Use spark-proof tools. Vapours are heavier than air and spread along the floor. They form explosive mixtures with air. In order to avoid the risk of fires and explosions, never use compressed air when handling. Empty containers may contain flammable or explosive vapours.

Measures to prevent aerosol and dust generation

Use general or local exhaust ventilation to prevent inhaling vapours and aerosols.

Measures to protect the environment

Do not discharge into drains, surface water and soil. After use immediately close container tightly.

7.1.2. Advice on general occupational hygiene

Use good personal hygiene practices – wash hands at breaks and when done working with material. Do not eat, drink or smoke while working. Do not breathe vapours/mist. Avoid contact with skin, eyes and clothes. Remove contaminated clothes and wash them before reuse. Wear suitable protective equipment; see Section 8. In case of insufficient ventilation, wear suitable respiratory protection equipment. Avoid exposure - obtain special instructions before using. Refer to instructions on label and regulations for safety and health at work. Regular cleaning of equipment, work area and clothing is recommended.

7.2. Conditions for safe storage, including any incompatibilities

7.2.1. Technical measures and storage conditions

Store in accordance with local regulations. Keep in a cool, dry and well ventilated place. Keep away from heat and sources of ignition. Keep away from food, drink and animal feeding stuffs. Keep away from incompatible products (see section 10).

7.2.2. Packaging materials

-

7.2.3. Requirements for storage rooms and vessels

Close opened containers after use. Put the containers upright to prevent from leaking. Do not store in unlabelled containers. The empty containers contain the residues of the preparation and therefore can also pose a risk.

7.2.4. Storage class

-

7.2.5. Further information on storage conditions

-

7.3. Specific end use(s)

Recommendations

See identified uses in Section 1.2.

Industrial sector specific solutions

-

8. Exposure controls/personal protection

8.1. Control parameters

8.1.1. Occupational exposure limit values

Name (CAS) Limit values Short-term exposure limit Remarks Biological Tolerance Values
ml/m3
(ppm)
mg/m3
ml/m3
(ppm)
mg/m3
Acetone (67-64-1) 500 1210 1500 3620
acetone (67-64-1) 750 1780 1000 2375 India; source: Ministry of Labour and Employment

8.1.2. Information on monitoring procedures

BS EN 14042:2003 Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents. BS EN 482:2012+A1:2015 Workplace exposure. General requirements for the performance of procedures for the measurement of chemical agents. BS EN 689:2018 Workplace exposure. Measurement of exposure by inhalation to chemical agents. Strategy for testing compliance with occupational exposure limit values.

8.1.3. DNEL/DMEL values

For components

Name Type Exposure route Exposure frequency Value Remark
acetone (67-64-1) Worker inhalation long term (systemic effects) 1210 mg/m³
acetone (67-64-1) Worker inhalation short term (local effects) 2420 mg/m³
acetone (67-64-1) Worker dermal long term (systemic effects) 186 mg/kg bw/day
acetone (67-64-1) Consumer inhalation long term (systemic effects) 200 mg/m³
acetone (67-64-1) Consumer dermal long term (systemic effects) 62 mg/kg bw/day
acetone (67-64-1) Consumer oral long term (systemic effects) 62 mg/kg bw/day

8.1.4. PNEC values

For components

Name Exposure route Value Remark
acetone (67-64-1) fresh water 10,6 mg/L
acetone (67-64-1) marine water 1,06 mg/L
acetone (67-64-1) water treatment plant 100 mg/L
acetone (67-64-1) fresh water sediment 30,4 mg/kg dry weight
acetone (67-64-1) marine water sediment 3,04 mg/kg dry weight
acetone (67-64-1) soil 33,3 mg/kg dry weight

8.2. Exposure controls

8.2.1. Appropriate engineering control

Substance/mixture related measures to prevent exposure during identified uses

Handle in accordance with good industrial hygiene and safety practice. Use good personal hygiene practices – wash hands at breaks and when done working with material. Do not breathe vapours/aerosols. Do not eat, drink or smoke while working. Avoid contact with skin, eyes and clothes. Appropriate technical measures to reduce exposure of workers must be chosen depending on the specific use of the product and the resulting risk of exposure at the workplace.

Organisational measures to prevent exposure

Remove all contaminated clothes immediately and wash them before reuse. Keep eyewash bottles or personal eyewash units available at the workplace.

Technical measures to prevent exposure

Provide good ventilation and local exhaust in areas with increased concentration. Keep away from food, drink and animal feeding stuffs.

8.2.2. Personal protective equipment

Eye and face protection

Wear tight fitting protective goggles and/or face protection (EN 166).

Hand protection

Protective gloves (EN 374). The penetration time is determined by the protective glove manufacturer and must be observed. Observe the manufacturer's instructions regarding the use, storage, maintenance and replacement of gloves. In case of damage or at the first signs of wear and tear, change the gloves immediately. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Wash hands after every use.

Appropriate materials

Material Thickness Penetration Time Remark
Butyl rubber 0,3 mm ≥ 8 h

Skin protection

Protective antistatic clothing EN 1149 (1:2006, 2:1998 and 3:2004, 5:2008), protective antistatic shoes (EN 20345:2012). Immediately wash contaminated clothing before reuse.

Respiratory protection

In case of insufficient ventilation wear suitable respiratory protection. Protective masks (EN 136) or half masks (EN 140) with filter A (EN 14387). Wear suitable protective breathing mask (EN 136) with filter A2-P2 (EN 14387).

Thermal hazards

-

8.2.3. Environmental exposure controls

Technical measures to prevent exposure

Do not allow product to reach drains, sewage systems or ground water.

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1. Information on basic physical and chemical properties

- Physical state: liquid
- Colour: colourless
- Odour: pungent
Odour threshold: 13 ppm

Important health, safety and environmental information

- pH No information.
- Melting point/freezing point No information.
- Initial boiling point/boiling range No information.
- Flash point -16,99 °C (closed cup)
- Evaporation rate No information.
- Flammability (solid, gas) No information.
- Explosion limits (vol%) 2 – 13 vol %
- Vapour pressure 433,3 hPa at 39,5 °C
245,3 hPa at 20 °C
- Vapour density No information.
- Density Density:
0,791 g/cm3 at 25 °C
- Solubility Water:
miscible
- Partition coefficient Log Pow:
-0,24
- Auto-ignition temperature 465 °C
- Decomposition temperature No information.
- Viscosity No information.
- Explosive properties No information.
- Oxidising properties No information.

9.2. Other information

- Remarks: Surface tension: 23.2 mN/m at 20.0°C.

10. STABILITY AND REACTIVITY

10.1. Reactivity

No data available.

10.2. Chemical stability

Product is stable under normal conditions of use, recommended handling and storage conditions.

10.3. Possibility of hazardous reactions

No data available.

10.4. Conditions to avoid

Protect from heat, direct sunlight, open fire, sparks. Take precautionary measures against static discharges. Avoid contact with incompatible materials.

10.5. Incompatible materials

Reducing agents. Bases.
Oxidants.
Acetone reacts violently with phosphorous oxychloride.

10.6. Hazardous decomposition products

Under normal use conditions no hazardous decomposition products are expected. In case of fire/explosion vapours/gases that pose a health hazard are released.

11. Toxicological information

11.1. Information on toxicological effects

(a) Acute toxicity

NameExposure routeTypeSpeciesTimeValueMethodRemark
acetone (67-64-1)oralLD50rat 5800 mg/kgBehavioural: Altered sleep time, tremor, headache. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea.
acetone (67-64-1)inhalationLD50rat8 h 50100 mg/m3Drowsiness, Dizziness, Unconciousness
acetone (67-64-1)dermalLD50guinea pig 7426 mg/kg
Additional information: The product is not classified for acute toxicity.

(b) Skin corrosion/irritation

NameSpeciesTimeResultMethodRemark
acetone (67-64-1)rabbit24 hMild irritating.
Additional information: The product is not classified as irritating to the skin.

(c) Serious eye damage/irritation

NameSpeciesTimeResultMethodRemark
acetone (67-64-1)rabbit24 hIrritating.
Additional information: Causes serious eye irritation.

(d) Respiratory or skin sensitisation

NameExposure routeSpeciesTimeResultMethodRemark
acetone (67-64-1)dermalguinea pigNon sensitising.
Additional information: The product is not classified as sensitising.

(e) (Germ cell) mutagenicity

No information.

(f) Carcinogenicity

No information.

(g) Reproductive toxicity

No information.

Summary of evaluation of the CMR properties

The product is not classified as carcinogenic, mutagenic or toxic for reproduction.

(h) STOT-single exposure

NameExposure routeTypeSpeciesTimeOrganValueResultMethodRemark
acetone (67-64-1)--May cause drowsiness or dizziness.
Additional information: May cause drowsiness or dizziness.

(i) STOT-repeated exposure

Additional information: Repeated exposure may cause skin dryness or cracking.

(j) Aspiration hazard

Additional information: Aspiration hazard: Not classified.

12. Ecological information

12.1. Toxicity

12.1.1. Acute (short-term) toxicity

For components
Substance (CAS Nr.) Type Value Exposure time Species Organism Method Remark
acetone (67-64-1) LC50 5540 mg/L 96 h fish Oncorhynchus mykiss
LC50 8800 mg/L 48 h crustacea Daphnia magna

12.1.2. Chronic (long-term) toxicity

No information.

12.2. Persistence and degradability

12.2.1. Abiotic degradation, physical- and photo-chemical elimination

No information.

12.2.2. Biodegradation

For components
Substance (CAS Nr.) Type Rate Time Evaluation Method Remark
acetone (67-64-1) biodegradability 91 % rapidly biodegradable OECD 301 B

12.3. Bioaccumulative potential

12.3.1. Partition coefficient

For product
Media Value Temperature pH Concentration Method
Log Pow -0,24

12.3.2. Bioconcentration factor (BCF)

For components
Substance (CAS Nr.) species Organism Value Duration Evaluation Method Remark
acetone (67-64-1) - Does not bioaccumulate.

12.4. Mobility in soil

12.4.1. Known or predicted distribution to environmental compartments

No information.

12.4.2. Surface tension

No information.

12.4.3. Adsorption/Desorption

No information.

12.5. Results of PBT and vPvB assessment

The substance is not considered persistent, bioaccumulative and toxic (PBT).

12.6. Other adverse effects

No information.

12.7. Additional information

For product

Not classified as hazardous to the aquatic environment.
Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.

13. Disposal considerations

13.1. Waste treatment methods

13.1.1. Product / Packaging disposal

Waste chemical

Disposal must be made according to official regulations: deliver it to authorised collector/remover/transformer of hazardous waste. Do not allow product to reach drains/sewage systems. Dispose of in accordance with applicable waste disposal regulation.

Packaging

Uncleaned containers are classified as hazardous waste - they should be handled in the same manner as the contents. Deliver completely emptied containers to approved waste disposal authorities. Empty containers represent a fire hazard as they may contain flammable product residues and vapour. Uncleaned containers should not be perforated, cut or welded. Dispose of in accordance with applicable waste disposal regulation.

13.1.2. Waste treatment-relevant information

-

13.1.3. Sewage disposal-relevant information

-

13.1.4. Other disposal recommendations

-

14. Transport information

14.1. UN number

UN 1090

14.2. UN proper shipping name

ACETONE

14.3. Transport hazard class(es)

3

14.4. Packing group

II

14.5. Environmental hazards

NO.

14.6. Special precautions for user

Limited quantities

1 L

Tunnel restriction code

(D/E)

IMDG flashpoint

-16.99 °C, c.c.

IMDG EmS

F-E, S-D

14.7. Transport in bulk according to Annex II of Marpol and the IBC Code

Goods may not be carried in bulk in bulk containers, containers or vehicles.


15. Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture

- Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)(including last amendment Commission Regulation (EU) 2015/830)

- Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures

15.1.1. Information according 2004/42/EC about limitation of emissions of volatile organic compounds (VOC-guideline)

Not applicable.

15.2. Chemical Safety Assessment

A Chemical Safety Assessment has not been carried out.

16. Other information

Indication of changes

-

Abbreviations and acronyms

ATE - Acute Toxicity Estimate
ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road
ADN - European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
CEN - European Committee for Standardisation
C&L - Classification and Labelling
CLP - Classification Labelling Packaging Regulation; Regulation (EC) No 1272/2008
CAS# - Chemical Abstracts Service number
CMR - Carcinogen, Mutagen, or Reproductive Toxicant
CSA - Chemical Safety Assessment
CSR - Chemical Safety Report
DMEL - Derived Minimal Effect Level
DNEL - Derived No Effect Level
DPD - Dangerous Preparations Directive 1999/45/EC
DSD - Dangerous Substances Directive 67/548/EEC
DU - Downstream User
EC - European Community
ECHA - European Chemicals Agency
EC-Number - EINECS and ELINCS Number (see also EINECS and ELINCS)
EEA - European Economic Area (EU + Iceland, Liechtenstein and Norway)
EEC - European Economic Community
EINECS - European Inventory of Existing Commercial Substances
ELINCS - European List of notified Chemical Substances
EN - European Standard
EQS - Environmental Quality Standard
EU - European Union
Euphrac - European Phrase Catalogue
EWC - European Waste Catalogue (replaced by LoW – see below)
GES - Generic Exposure Scenario
GHS - Globally Harmonized System
IATA - International Air Transport Association
ICAO-TI - Technical Instructions for the Safe Transport of Dangerous Goods by Air
IMDG - International Maritime Dangerous Goods
IMSBC - International Maritime Solid Bulk Cargoes
IT - Information Technology
IUCLID - International Uniform Chemical Information Database
IUPAC - International Union for Pure Applied Chemistry
JRC - Joint Research Centre
Kow - octanol-water partition coefficient
LC50 - Lethal Concentration to 50 % of a test population
LD50 - Lethal Dose to 50% of a test population (Median Lethal Dose)
LE - Legal Entity
LoW - List of Wastes (see http://ec.europa.eu/environment/waste/framework/list.htm)
LR - Lead Registrant
M/I - Manufacturer / Importer
MS - Member States
MSDS - Material Safety Data Sheet
OC - Operational Conditions
OECD - Organization for Economic Co-operation and Development
OEL - Occupational Exposure Limit
OJ - Official Journal
OR - Only Representative
OSHA - European Agency for Safety and Health at work
PBT - Persistent, Bioaccumulative and Toxic substance
PEC - Predicted Effect Concentration
PNEC(s) - Predicted No Effect Concentration(s)
PPE - Personal Protection Equipment
(Q)SAR - Qualitative Structure Activity Relationship
REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation (EC) No 1907/2006
RID - Regulations concerning the International Carriage of Dangerous Goods by Rail
RIP - REACH Implementation Project
RMM - Risk Management Measure
SCBA - Self-Contained Breathing Apparatus
SDS - Safety data sheet
SIEF - Substance Information Exchange Forum
SME - Small and Medium sized Enterprises
STOT - Specific Target Organ Toxicity
(STOT) RE - Repeated Exposure
(STOT) SE - Single Exposure
SVHC - Substances of Very High Concern
UN - United Nations
vPvB - Very Persistent and Very Bioaccumulative

Key literature references and sources for data

Safety Data Sheet, Cure It Acetone, G& B Northwest Ltd, Revision Date: 6th December 2018, Version: 2.2.

List of relevant H phrases

H225  Highly flammable liquid and vapour.
H319  Causes serious eye irritation.
H336  May cause drowsiness or dizziness.
EUH066  Repeated exposure may cause skin dryness or cracking.

  • Provided correct labelling of the product
  • Compliance with the local legislation
  • Provided correct classification of the product
  • Provided adequate transport data

© BENS Consulting | www.bens-consulting.com

The information of this SDS is based on the present state of our knowledge and meets the requirements of EU and national laws. The user’s working conditions however, are beyond our knowledge and control. The product is not to be used for purposes other than those specified under Section 1 without a written permission. It remains the responsibility of the user to ensure that the necessary steps are taken to meet the laws and regulations. Handling of the product may only be done by people above 18 years of age, who are satisfactorily informed of how to do the work, the hazardous properties and necessary safety precautions. The information given in this SDS is to describe the product only in terms of health and safety requirements and should not, therefore, be construed as guaranteeing specific properties.